How to hang curtains
To ensure your curtains hang beautifully from day one, we recommend ironing your them on the design side before hanging to remove any creases from folding. Always use the heat setting recommended on the care instruction label.

How to hang
Pencil Pleat Curtains
- Tie the cords at both ends of the tape BEFORE GATHERING to prevent pull-through when gathering. Pull the cords from the side of the curtain to the required fullness, spacing out gathers evenly. Tie the cords again, but do not cut the cords as you will need them for future cleaning or adjustments.
- Insert curtain hooks at approximately every 5th pocket. The pockets allow you to adjust the height of your curtains.
Hint: If you choose to gather the curtain less you will need to increase the number of curtain hooks used to maintain proper support. Otherwise the curtains will “sag” on the track when closed.

How to hang
Eyelet Curtains
- Start threading the eyelets onto the rod, making sure the end that you start with has the curtain edge pointing back towards the window/wall. By doing this, the curtain backing won't be visible from inside the room.
- The last eyelet at each end should sit over the wall bracket and stop before the finial or end of the rod. Eyelet curtains are designed with an even number of eyelets to ensure both ends can point back towards the wall for a neat and professional finish.